A-A-50122A
December 9, 1987
SUPERSEDING
A-A-50122
June 25, 1987
COMMERCIAL ITEM DESCRIPTION
TRUCKS, HAND, 3 SHELVES
STAINLESS STEEL UTILITY
The General Services Ministration has authorized the use of this commercial item description in preference to type I of MIL-T-16549.
1. CLASSIFICATION.
1.1 Classification. This commercial item description covers hand trucks of the following sizes as specified (see 5.2). Dimensions specified are in inches and do not include handles or bumpers:
Size 1 - 38 long by 23 wide by 36 high
Size 2 - 57 long by 24 wide by 43 high
Size 3 - 31 long by 20 wide by 34 high
2. SALIENT CHARACTERISTICS.
2.1 Design and construction. Trucks shall be of the size specified. Dimensions and capacities shall be as specified in Table I. Trucks shall be similar to figure 1, which is for illustrative purposes only and is not intended to preclude procurement of trucks otherwise meeting all of the requirements of this document. All trucks shall have 3 shelves, bumper(s), a handle and 4 removable casters. The truck shall be capable of holding 200 percent of its rated load capacity, uniformly distributed over the 3 shelves, for a period of 10 minutes, without weld failure, parts separation, metal tearing, breakage, or noticeable deformation. In addition, the truck, uniformly loaded to 150 percent of its rated capacity, shall be capable of being rolled onto a surface 2 inches below the original surface at the rate of 2 miles per hour without any of the deficiencies noted above.
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business