INCH-POUND
KKK--T--683F
15 December 2010
SUPERSEDING
KKK--T--683E
w/AMENDMENT 1
11 July 2005
FEDERAL SPECIFICATION
TRUCKS, HAND, TWO--WHEELED
The General Services Administration has authorized the use of this
federal specification by all federal agencies.
I.
SCOPE AND CLASSIFICATION
1.1 Scope. This specification covers the requirements for five types of two--
wheeled hand trucks.
1.2 Classification. The hand trucks covered by this specification shall be of
the following types, as specified (see 6.2):
Type I
- Drum.
Type II
-- Gas cylinder.
TypeIII
- General utility.
Type V
-- Welder tank, 2 cylinder capacity.
Type VI
-- Stair climbing.
2.
APPLICABLE DOCUMENTS
2.1 Government publications. The issues of the following documents, in effect
on the date of invitation for bids or request for proposal, form a part of this
specification to the extent specified herein.
Federal Standards:
FED--STD--H28
-- Screw--Thread Standards for Federal Services
FED--STD--595/13538
-- Yellow, Gloss
Military Specifications:
MIL-T-704
- Treatment and Painting of Material
Comments, suggestions, or questions on this document should be addressed to Defense
Supply Center Philadelphia (DSCP), ATTN: DSCP-ITAA, 700 Robbins Avenue.,
Philadelphia, PA 19111-5096 or e-mail to dscpg&inspecomments@dla.mil. Since
contact information can change, you may want to verify the currency of this address
information using the ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 3920
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business