KKK-T--683F
3.6.3 Type III. The type III general utility hand truck shall be constructed
of commercial magnesium or aluminum material. The truck shall stand alone,
without load, in a vertical position with the platform resting on the operating
surface. The truck shall incorporate at lease one chime hook for carrying a 55
gallon drum. The truck shall fit the curvature of the drum and shall be capable
of securely holding the drum on the truck in the carry position. When the chime
hook is not in use the truck can serve as a general utility hook.
3.6.3.1 Wheels. Wheels shall be made of commercial magnesium or aluminum. The
wheels, equipped with molded on solid rubber or polyurethane tires, shall be a
minimum of 8 inches diameter by 2 inches rim width and shall meet the
operational load ratings of the ICWM standard for industrial wheels. Rubber
tires furnished to the Government shall be not more than 12 months old on the
date of shipment by the supplier.
3.6.4 Type V. The type V welding tank truck shall have a two cylinder capacity
and shall have the wheels mounted outside the truck frame. The frame shall be
fabricated of steel tubing, pipe and steel shapes. A horizontal brace, the full
width of the frame, shall be provided to support the cylinders and to serve as a
means of anchoring the securing chains. Prongs for coiling 25 feet of oxygen
hose and 25 feet of acetylene hose simultaneously, shall be provided on the side
of the frame.
3.6.4.1 Securing chains. Two cylinder securing chains shall be provided. The
chains shall be fitted with quick--fastening devices and shall be adjustable for
various sizes of cylinders. Each chain shall restrain one cylinder.
3.6.4.2 Toolbox. A
heavy duty, lock--top toolbox shall be provided as an
integral part of the
truck. The box length shall be equal to the width of the
truck frame +0, --.75
inch and shall be not less than 5 inches deep. The box
shall be attached to
the upper horizontal frame brace and shall hinge from the
frame side.
3.6.4.3 Wheels. Wheels shall be equipped with molded on solid rubber or poly-
urethane tires having a minimum diameter of 14 inches by 2 to 2.50 inches rim
width. The wheels shall meet the operational load ratings of the ICWM standard
for industrial wheels.
3.6.5 Type VI. The type VI stair climber shall be fabricated from commercial
grade magnesium. The side rails and the crossbars shall be covered with a
protective Felt or rubber padding over the load area from the nose of the truck
to the handles.
3.6.5.1 Retaining strap and strap tightener. Each hand truck shall be provided
with a tie strap not less than 2 inches wide and 168 inches long. The strap
shall have a strength rating of not less than 500 pounds. Each hand truck shall
be provided with a hand strap tightener.
3.6.5.2 Crawler treads. Each hand truck shall be equipped with rubber belting
crawler treads mounted on roller bearings.
3.6.5.3 Wheels. Wheels, equipped with molded on solid rubber or polyurethane
tires, shall be a minimum of 6 inches diameter by 2 inches rim width and shall
meet the operational load ratings of the ICWM standard for industrial wheels.
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business